Small, circular hill, 25mm high, with a diameter of approx. 6 inches. Textured.

Illustration shows desert finish, but also available in green, dry grass, snow or grey finish

May be used for all scales.

Made from styrene which has been specially coated for added strength and durability.

Pack of two hills, each 25mm high, oval-shaped, measuring approx. 280mm to 300mm in length, and between 130mm and 170mm in width. Textured.

Illustration shows finish with green flock. Also available in dry grass, desert, snow or grey.

May be slight variations in shape.

Can be used for all scales.

Made from styrene which has been specially coated for added strength and durability.

Pack of two hills, each 25mm high, oval-shaped, measuring approx. 280mm to 300mm in length, and between 130mm and 170mm in width. Textured.

Illustration shows finish in earth blend. Also available in green, desert, snow or grey.

May be slight variations in shape.

Can be used with all scales.

Made from styrene which has been specially coated for added strength and durability.

Pack of two hills, each 25mm high, oval-shaped, measuring approx. 280mm to 300mm in length, and between 130mm and 170mm in width. Textured.

Illustration shows finish as sand. Also available in green, dry grass, snow and grey.

May be slight variations in shape.

Can be used for all scales.

Made from styrene which has been specially coated for added strength and durability.

Pack of two hills, each 25mm high, oval-shaped, measuring approx. 280mm to 300mm in length, and between 130mm and 170mm in width. Textured.

Illustration shows finish in snow. Also available in green, dry grass, desert or grey.

May be slight variations in shape.

Suitable for use with any scale.

Made from styrene which has been specially coated for added strength and durability.

25mm sloping hill with one flat side, measures 300mm x 200mm (12 inches in length x approx. 8 inches wide). Textured.

Illustration shows finish as desert. Also available in green, earth blend, snow or grey.

May be slight variations in shape.

Suitable for use with any scale.

Made from styrene which has been specially coated for added strength and durability.

Hill has one straight side, and is 25mm in height.

Approx. measurements are 300mm x 140mm (12 in. x 5.5 in) at widest points.

Textured.

Illustration shows finish in earth blend. Also available in green, desert, snow or grey.

May be slight variations in shape.

Suitable for use with all scales.

Made from styrene which has been specially coated for added strength and durability.

Pack of two hills, 25mm high.

One has two straight sides, the other with three.

Smaller section (which may be used as a corner piece) measures approx. 300mm x 220mm (12 inches x 8.5 inches).

Long rectangular piece measures approx. 370mm x 170mm. (14.5 inches x 6.5 inches).

Textured.

Illustration shows finish in green flock. Also available in dry grass, desert, snow or grey.

May be slight variations in shape.

Suitable for use with any scale.

Made from styrene which has been specially coated for added strength and durability.

Rectangular piece with two straight edges. 25mm high.

Approx. 12in x 9in at widest points.
Textured.

Illustration shows finish in green blend. Also available in dry grass, desert, snow or grey.

May be slight variations in shape.

Suitable for use with all scales.

Made from styrene which has been specially coated for added strength and durability.

Two piece corner pack of reinforced hills (reverse of HB11). 25mm high.

One has two straight sides, the other has three.

Small section (which may be used as a corner piece) measures approx. 12in x 8.5in.

Long rectangular piece measures approx.
14.5in x 6.5in.
Textured.

Illustration shows finish in green flock. Also available in dry grass, desert, snow or grey.

May be slight variations in shape.

Suitable for use with all scales.

Made from styrene which has been specially coated for added strength and durability.